Have you tried an instance where your game had stuck in your Xbox 360 and you don’t know exactly what you shoud do? Well I think this is the most common problem and most of you guys just freak out and want to rip of your Xbox 360. You could simply go to Morcosoft store and let it be repaired. However, if you are out of budget then you can just do it yourself by simply downloading an Xbox 360 repair guide.

Here are four simle ways to effectively get your game out of your Xbox 360 System.

1. Unplug the power for a couple of minutes while allowing your Xbox to reset. Re-attached the power cord and see if your game can be removed. If not, turn the power off and plug it again.

2. Basically, there are three different DVD drives that Xbox 360 uses. Try to look for a small hole on the right part of your Xbox 360 DVD drive flace plate. You will see it underneath if you have Samsung or Toshiba. Push the faceplate using a paper clip until it finally hits the gear. Spin the gear from left to right and continue doing it until you can feel it moved.

3. On the other hand, if you have Hitachi Drive, you will just be going to poke the first hole that you will see on the left part of your Xbox 360. You jsut need to follow the same procedures that are listed on tip number two by poking the gear until you can feel it moved. Take your time to spin it form left to right. Do not be in a hurry and do not puch too hard as it can damage your precious Xbox 360 system.

4. As soon as you see your game ejected, you can just simply pull it.  By following the Xbox 360 Repair Guide, it would be just So simple and easy! You just have to do it the right way!

There may be several diiferent reasons why you are experiencing this kind of a problem with your Xbox 360 system. Initially, you should understand the root of the problem and learn the “E” erros to help  you repair your Xbox 360. 

After your system has been rebooted , you will see one red light flashing in the bottom left corner of your Xbox 360. This signifies an “E” error and two numbers.

Sometimes if your Xbox is overheated, you only need to plug out your Xbox and then plug it again  to solve the problem. However, if it didn’t work at all then it must be a different problem. E64, E65 and E66 are the types of error that indicates DVD drive problem related.

E67, E68 or E69 are much difficult problems. Try to unplug your hard drive and play without it or you can also try to reformat it. Just make sure you simply and carefully folow the instructions. 

Another cause of the problem is with the Ethernet or networking port that is signified with an E73 message. Again, try unplugging it and plug it again.

If E74 message appears, it commonly means that the root of the problem is with your AV cable installed incorrectly. Once again, reconnecting it will help you solve the problem. Otherwise, the problem must be from a faulty ANA chip or a general hardware error related to your system overheating.

You might come to experience countless errors with your Xbox 360 but before you will learn on how to repair it, understand and simply determine the cause of the problem. Always search for the best solutions online and simple tips to follow effectively!